Some quick facts about the right ways to ensure nuts and bolts don’t come loose.

Be aware when installing nuts or bolts that a split washer can distort final torque values. The “open” ends of a split washer can dig into the metal surface and cause a torque wrench to misrepresent torque values. That’s why there are no lock washers on torque-sensitive bolts like engine cylinder head bolts. Technically, the threads on a bolt or nut torqued to full specified value are preloaded enough to prevent loosening.  

Understand what type of lock nut you’re using. “Lock nuts with nylon inserts can be re-used up to a dozen times,” says Andrew Brown, engineer with Whittet-Higgins Company, an international manufacturer of industrial fasteners. “A deformed-thread lock nut is designed to mechanically distort the threads on a bolt. Using a deformed-thread lock nut on the same bolt again can damage the threads enough to create a weak connection.”

Use the right type of lock nut for the right location. Deformed-thread lock nuts are often used where engine heat, exhaust heat or frictional heat could weaken the grip of nylon-insert lock nuts.

If a bolt or nut with damaged threads must be re-used, it’s better to use a thread cleaning tap or die rather than a thread cutting tap or die. Thread cleaners re-shape damaged threads. Thread cutting tools slice through damaged threads, resulting in weaker threads.

As a farmer repairing equipment, be suspicious of previous repairs. “Ag machinery is notorious for being repaired under field conditions,” says Brown. “There’s a tendency to use whatever nuts and bolts that are available, so lock nuts get swapped for common nuts and vice versa.” With catch-as-catch-can field repairs in mind: never use a lock nut on a fastener that needs to be torqued with a torque wrench because lock nuts distort torque values. 

Ultimately, never assume the nuts and bolts used in previous repairs are correct. The current breakdown may be due to inadequate performance of incorrect nuts and bolts.

There’s Dirty, Then There’s DIRTY When it Comes to Air Filters

In the Shop: No Such Thing as “Unbreakable”

Dan Anderson: That Horrible “Click-Click-Click” Sound

Dan Anderson: The Devil is in the Details

Dan Anderson: When To Buy A Special Tool

The most recent land use survey showed that China’s total arable land decreased from 334 million acres in 2013 to 316 million acres in 2019, a loss of more than 5 percent in just six years.

AgDay TV Markets Now:  Ted Seifried of Zaner Ag Hedge talks about why the funds continue to sell the grains and how much technical damage has been done to corn and soybean charts.

Lawmakers are pushing for EPA emergency action to allow year-round E15.

Another day of fund selling in the grains when does it end? Cattle continue to charge higher with more contract highs in feeders, how high will that market go?  Ted Seifried of Zaner Ag Hedge has the answers.  

I salute those fearless farmer-mechanics. They build their own splitting stands, they figure out how to diagnose hydraulic flow and pressure problems and tackle large-scale repairs.

Before planting even starts, diseases are likely on soil residue. That includes tar spot. While many believe rainfall and temperatures are key tar spot drivers, Agronomist Missy Bauer says there's a third indicator.

© 1995 - 2023 Farm Journal, Inc. All RightsReserved. This material may not be published, broadcast, rewritten,or redistributed.

All market data delayed 10 minutes.